This item is on Christmas Sale now!Add to cart to check the sale price.
The Dominator V3 features an immersive 16:9 widescreen image for compatibility with HD content and HD digital video links (e.g. DJI Inspire, Phantom 3, Amimon CONNEX, Parrot Bebop, 3DR). When it comes time to rip it up FPV racing, insert an analog receiver into the DOMV3ís modular receiver bay and record the footage with the built in DVR.
The Dominator V3 is the newest FPV video goggle in the Dominator series from Fat Shark . These video goggles allow for first-person viewing (FPV) of the video downlink from the wireless transmitter on your RC aircraft for a truly immersive flying experience.
The Dominator V3 focuses on HDMI connetivity with 720p support through a robust mini HDMI port and 16:9 format WVGA image. An improved DVR can swap between NTSC and PAL format as well as power backup to write files should the power be disconnected while recording. The DominatorV3 has modulal bays to support 1G3, 2G4 and 5G8 band receivers and ability to add the Trinity head tracker.
The Dominator V3 feature a modular design, meaning that additional modules and accessories can be added for expandable functionality. In order to receive the video downlink from your wireless video transmitter, a receiver module is required. Receiver modules are available in 1.3GHz, 2.4GHz, or 5.8GHz options. Please note that Fat Shark only guarantees compatibility with NexwaveRF modules from Fat Shark for ImmersionRC. To install the receiver module, simply remove the door panel on the side of the headset, insert the module, and snap the door panel back in place.
For the most immersive experience, the optional 3-Axis Trinity Head Tracker module can be inserted into a slot on the opposite side of the headset, accessed through a second removable door panel. The head tracker lets you control pan, tilt, and roll of your aircraft-mounted FPV camera (sold separately) using the motion of the headset.
Power is provided to the headset using the new 1800mAh battery which securely fits in a head strap pocket on the headset. The battery pack includes a 3 pole balance lead for charging off standard RC type chargers. Also included with the headset is a DC power cable, AV cable, and carrying case.
FOV (field of view): 30 degree diagonal (the same plastic optics as DOMV2)
Interpupillary Distance (IPD): 59 to 69 mm (adjustable)
Optional Diopter Lens Inserts: -2, -4, -6 dpt
Mode Selection (Wired/Wireless)
||Power Supply: 7 - 13 V (2S/3S supply)
Power Consumption: 390mA wireless/ 230mA direct mode (no RX)
Driver Board: Using the same as HD's, support Side/Side 3D
RF Modules: Infinite channel support on multiple bands
Head Tracker: Modular (sold separately)
Analog DVR: MicroSD support to 32Gb
Record Rate: 6Mbps (MJPG compression, 30 fps, AVI)
File playback (native recording, no codec support)
Upgradeable via SD card
PAL/NTSC continuous scan auto detect/mode change
Auto save if power removed
DVR stay off when not switched on
||800 x 480 WVGA LCD
Polarized LED backlight
NTCS/PAL auto selecting
Input HDMI 16:9
Video 4:3 horizontally stretched
(Current A/C chip only supports to 720p 50/60 Hz, could be upgraded to 1080p in the future)
||Ergonomic molded headset w/ adjustable headband
Dimensions: 169.2 x 80 x 45.5 mm
Weight: 152 g
||7.4V, 1.8A (13.32Wh)
||3.5mm AV in/out port
Power in port
3.5mm 3p earphone port
MiniDIN4 data port (head tracking)
MicroSD insert slot
RF module port
||Compatibility is only guaranteed with Fat Shark and ImmersionRC transmitters.
Dominator V3 WVGA headset
16:9 widescreen WVGA display (30 degree FOV diagonal)
Supports Interlaced 3D
NTSC/PAL auto switching
Built in Digital Video Recorder (DVR)
DVR will auto-save any recorded video if the is power disconnected
Mini HDMI Display Port
Modular receiver bay
Dominator V3 Headset with fan equipped face plate†
7.4V 1800mAh battery with LED indicator
Zipper carry case
DC DIY cable