CUAV V5 Nano Autopilot Flight Controller

CUAV V5 Nano Autopilot Flight Controller

Item# NA0125
USD $169.99
  • DESCRIPTION
  • REVIEWS
QTY:

CUAV V5 nano is an autopilot flight controller for space-constrained applications, designed by CUAV in collaboration with the PX4 team.It is compatible with PX4 and Ardupilot open source platform firmware, which can meet different uer needs. The autopilot is small enough to use in 220mm racing drones, but remains powerful enough for most drone use.It is suitable for fixed wing, helicopter, multi-rotors, VTOL, UAV drones and etc.

Main Features:
- Compact but powerful V5 nano flight controller + NEO GPS
- Support for hardware on open source platform PX4 and Autopilot
- Suitable for fixed-wing drones, helicopters, multicopters, FPVs, VTOL, Unmanned UAV and etc
- High Performance: Equipped with STM32F765 microprocessor, features 216MHz main frequency, 2M flash and 512K SDRAM. There are four groups of isolation chips and a MS5611 high-precision air gauge.
- Easy to install and dismantle with 2.6mm spacing between IO pins.
- Real-time Data Monitor: Five groups of built-in sensors enhance its safety and stable performance. There are ICM-20689 accelerometer and gyroscope, ICM-20602 accelerometer and gyroscope, BMI055 accelerometer and gyroscope, IST8310 magnetic compass and MS5611 air gauge.

Specifications:
Hardware Parameters:
- Main FMU Processor: STM32F765(32-bit, 216MHz, 2MB flash, 512KB RAM)

Sensors:
- Accelerometer: ICM-20602/ICM-20689/BMI055
- Gyroscope: ICM-20602/ICM-20689/BMI055
- Magnetometer: IST8310
- Air Gauge: MS5611

Interfaces:
- UART Ports: 5
- I2C Ports: 4
- CAN: 2
- ADC: 2
- PWM Output: Up to 11
- PWM Input: 4
- PPM input: 1
- DSM/SBUS/RSSI: 1
- Power model 1: 1
- Power Model 2: 1
- Safety Switch: 1
- Buzzer: 1
- USB-TYPE-C: 1
- TF slot: 1

Supported Function:
- Firmware: PX4/Ardupilot
- Model: Multirotors/plane/helicopter/VTOL/UAV/Rover, etc.

Working Conditions & Physical Parameters:
- PM Working Voltage: 4.5 to 5.5V
- USB Voltage: 5Vą0.25V
- Servo Rail Input: 0 to 36V
- Working Temperature: -40 to 85°

Weight & Dimensions:
- Dimensions: 40 x 60 x 17.5mm
- Weight: 40g

Package Included:
- 1 x V5 nano Flight Controller
- 2 x Dupont Cables
- 1 x ADC6.6 Cable
- 2 x I2C/CAN Cables
- 1 x SBUS Signal Cable
- 1 x RSSI Cable
- 1 x DSM Signal Cable
- 1 x ADC3.3 Cable
- 1 x Debug Cable
- 1 x Safety Switch + Cable
- 1 x Voltage Current Cable
- 1 x PW-Link Module + Cable
- 1 x Power Suppl Module
- 1 x 16GB Memory Card
- 1 x I2C Expansion Board
- 1 x TTL Board

cuav v5 nano

cuav flight controller

cuav v5 flight controlelr nano

cuav flight controller

cuav v5 nano flight controller

nano flight controller

cuav v5 flight controller