BETAFPV Beta75X 2S Brushless Whoop Drone BNF
BETAFPV Beta75X 2S Brushless Whoop Drone BNFBETAFPV Beta75X 2S Brushless Whoop Drone BNF

BETAFPV Beta75X 2S Brushless Whoop Drone BNF

Item# CA0213
USD $139.99
  • DESCRIPTION
  • VIDEOS
  • REVIEWS
Receiver: 
Frsky FCCFrsky LBTFlysky RXDSMX RX
QTY:

The micro brushless whoop drones are becoming more and more popular now. Unlike the other bigger fpv racing qauds, you can fly the 2S brushless quads in your house, in your backyard or park. Due to the brushless power, what the other big quad do, you can do on those brushless quad too.
Beta75X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.

With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing pro.

Specifications of F4:
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
Specifications of ESC:
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinue current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G

The Whole drone do not need any soldering or tinkering necessary. Customized lightest 1103 11000KV motors with cable connectors provide enough power for it.The AIO camera VTX on the Beta75X is a customed version of Z02. Just plug and play.

Lightest 1103 motors in the world. Only 3.2g with connector. This motor is customed for Beta75X 2S Whoop drone. A 1.5mm header pins connector is include. So no soldering needed, just plug and play.
Specifications:
Weight: 13g/ 4pcs
Size: 13.5x13.5x16mm
Efficient: 3.4-1.4g/W
Suit for BETAFPV 2S frame only
Highest value brushless motor

CUSTOMED Z02

The AIO camera VTX on the Beta75X is a customed version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

Durable and light enough frame is customized for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.350mAh 2S high rate battery is recommend in default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable.

2S 350mAh Battery
Size: 57.8x16.3x12mm
Weight: 20.8g/pcs
Pack & Rate: 2S 7.4V 35C/70C
XT30 20AWG silicone wire
3 mins long flight on Beta75X

Props out
The propellers spinning direction is reversed from the Betaflight default configuration in each drone we sell (Props Out). With this there will be no more dipping even in hardest cornering. Please see the third bullet for detailed setup steps.

Package Included:
1 x Beta75X BNF 2S Whoop Quadcopter
1 x Spare 40mm 4-blades props (2CW+2CCW)
1 x 350mAh 2S 35C-70C battery
1 x Spare Canopy

Note: Due to the battery in it, the shipping time will be much longer than usual. If you choose DHL, we will send it without battery.

Introducing the Beta75X
Beta75X