ARRIS FPV250 racing drone RTF is fully assembled, tuned and tested by the technician.ARRIS FPV250 RTF comes with F3 flight controller, ARRIS S2205 2300KV brushless motor, Falcon 20A ESC, 5042 high efficiency propeller, 700TVL camera, 5.8G video tx and Radiolink AT9 and receiver.The drone is easy to fly and maintain and it is very powerful. We have pre-installed HD camera, 5.8g 200mw FPV TX and antenna on the drone. You only need to prepare the battery, then you can fly it.
BNF Weight: 385g (without battery)
Diagonal Wheelbase: 275mm
Frame Material: Carbon/glass fiber composited sheet
Flight Controller: F3 Flight Controller
Radio System: RadioLink AT9 9-CH radio with Receiver
Camera: 700TVL HD video camer
FPV TX: 5.8G 200mw 32CH
Antenna: 5.8G Antenna
Flying Time: 10min (with 3S 2200mAh battery)
Suggest Battery: 3S-4S
Different with the old V1.0 version, the latest V2.0 abandoned the CC3D flight controller, but use the more popular and effective F3 flight controller. This has greatly improved the flight performance and function extension of the ARRIS FPV250 racing drone.
ARRIS FPV250 is equipped with brand falcon 20A ESC, which is BLheli, support oneshot 125, ensures the excellent stability and dynamic output.
Input: 2-4S lipo
Constant Current: 20A
Burst Current (10S): 30A
BEC: No BEC, OPTO only
Weight: 9.6g (with wires)
Powerful ARRIS New Version Brushless Motor.The ARRIS S2205/2300KV brushless motor is specially designed for 200-300 sizes multirotors, which weighs only 29g.Each motor is carefully balanced and tested before shipped out from factory.
No. of Cells(Lipo): 3-4S
Motor Dimensions: 27.4 x 28.75mm
Stator Diameter: 22mm
Stator Length: 5mm
Idle Current: 1.3A
Max Con. Current: 32A
Max Con. Power: 500W
The combining work of ARRIS S2205 brushless motor, falcon 20A brushless ESC and the 5042 three-blade propeller makes the drone very powerful and outstanding. This is the best dynamic match we`ve tested.
ARRIS makes the main power connectors and video tx plug in advance, which make it more convenient for you to connect the wires.
ARRIS X-Speed 250 has integrated with a remote controller battery warning buzzer, pilot can set the threshold (adjustable) according to CF parameter-adjustment software. In addition, you can also locate your racing drone through triggering the buzzer with the switch D on the transmitter.
Self-level modeis the easiest to fly, because when you leave the stick at the centre and not controlling it, your drone just level itself and stays there. But Most advanced pilots would tell you they fly in Acro mode ALL THE TIME. Here are some of the advantages of Acro mode.
Manual modeis useful for acrobatics such as flips or rolls, or FPV when smooth and fast control is desired. The picture below is what we set on our own Radiolink AT9 Radio.
RadioLink AT9 9-Channel 9CH 2.4GHz Transmitter + R9D Receiver.The AT9 radio is with high performance-price ratio. And it can support strength, receiver voltage monitored, extending battery voltage, temperature, motor RPM, GPS etc.
1 xARRIS FPV250 Racing Quad Frame
4 xARRIS S2205 2300KV Brushless Motors (2 CW + 2 CCW)
4 xARRIS Falcon 20A BLheli Brushless ESC
4 xARRIS 5042 3-blade propeller
1 xF3 Flight controller
1 x700TVL 2.8mm camera
1 x5.8G 200mw 32CH FPV TX
1 xFPV Transmitter Antenna
1 xRadiolink AT9 Transmitter + RD9 Receiver
Radio System and Other Electronic Equipment Required for Assembly (Not Include):
Lipo: 3S 1500-2200Mah or 4S 1100-1500mah