ARRIS F210 ----- Professional Racer, designed for expert flyers, which will give you the incomparable flight enjoyment.

The ARRIS F210 is another competitive level FPV Racing drone developed on the basis of X-Speed 250, we have collected all the good suggestions from the customer feedback and make a continuous research and improvements according to our professional analysis, finally this F210 comes out.

It has very simply layout, which is not only convenient for repairing, but also guarantee the strength of the structure. After hundreds of tests (including drop test, crash test, bending resistance test), we found this F210 has very firm structure. This greatly guarantee the racer`s high quality and safe flight.

F210 is light in weight, 390g only for the whole frame, this has greatly improved the power and flight duration of the racer.

F210 is designed with lower CG and the battery installing plate is sunken which makes the installed battery is in horizontal with the camera. Such kind of design ensures beautiful appearance, reduces the wind resistance and at the same time, the lower CG design will make the racer be more agile when doing the 3D rolling.

F210 has pretty simply wring method, with all wires hidden inside the frame, which could not only reduce all kinds of wiring mess, but also effectively protect cables and electronic components assembled on it.

Considering that sometimes pilot needs to change frequency of the video transmitter and receiver to make them work correctly, we have reserved 2 holes on both upper plate and bottom plate of the F210. No need to disassemble the frame any more.

With the adjustable camera angle, pilot can adjust the angle of the camera to obtain the best angle simply and conveniently.

Different with the previous X-Speed 250, the latest F210 abandoned the CC3D flight controller, but use the more popular and effective F3 flight controller. This has greatly improved the flight performance and function extension of the F210 FPV racing drone.

F210 is equipped with brand new 20A ESC and brushless motor, ensures the excellent stability and dynamic output.

F210 is assembled with the latest ARRIS 5in 3-blade propeller, which can perfectly work with the 2204 motors. With this setup, the F210 would have better performance. We joked that this ARRIS 5in propeller should have let us cry, because it is too strong to damage, even after a heavy crash, it is still the same, no bent, no broken. What can we say? This will save customers much on purchasing the spare propellers.

F210 has pre-installed with a 5.8g 200mw video transmitter, featuring strong signal transmission and long distance transmission.

F210 has integrated with a remote controller battery warning buzzer, pilot can set the threshold (adjustable) according to CF parameter-adjustment software. In addition, you can also locate your racing drone through triggering the buzzer with the switch D on the transmitter.

Flight Modes: Manual Mode and Self-Level Mode

Self-level mode is the easiest to fly, because when you leave the stick at the centre and not controlling it, your drone just level itself and stays there. But Most advanced pilots would tell you they fly in Acro mode ALL THE TIME. Here are some of the advantages of Acro mode.

Manual mode is useful for acrobatics such as flips or rolls, or FPV when smooth and fast control is desired.

This package includes :
1 x ARRIS F210 Racing Drone kit
1 x RadioLink AT9 9-Channel 9CH 2.4GHz Transmitter 
1 x RadioLink R6D Receiver
1 x F3 Flight Controller 
4 x ARRIS 2205 2300KV Brushless Motor
4 x ARRIS Swift 20A ESC 
4 x ARRIS High Quality ABC+PC 5045 Bullnose Three Props Propeller
1 x 700 line CMOS Camera 
1 x LED Board
1 x ARRIS Mini Power Distribution Board
1 x 5.8G 200mW Video TX
2 x ARRIS Battrey Strap

What you need to build a Ready to Fly Racing Drone(Not included):
1 X 4S 1300-1500mah Li-Po battery
1 X Battery charger;

ARRIS F210 User Guide. Please carefully watch this video before begining to fly.