ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)
ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)

ARRIS C250 V2 250MM FPV Racing Drone BNF (DIY Version)

Item# CA0172
USD $139.00
$169.00
Save $30.00 (17.8%)
  • DESCRIPTION
  • REVIEWS
Receiver: 
NORadiolink R12DSM(LA0041) (+$15)Frsky XSR RX (+$25)Flysky FS A8S (LA0048)(+$15)
QTY:
ARRIS C250 V2 is one professional 250 fpv racing drone produced by ARRIS on the basis of the ARRIS C250. The same as the ARRIS C250, the C250 V2 has the advantage of simple structure and high strength. ARRIS C250 V2 BNF is fully assembled, when you receive it, you need to install your own receiver, and adjust the settings in betaflight

Main Features:
1. Simple structure frame,easy to assemble and easy to repair.
2. High quality 3K Carbon fiber frame, the material is imported from Japan
3. 4mm thick arms, super strong and durable
4. Super Light frame, only $136g
5. Betaflight OMNIBUS F4 Pro V2 flight controller
6. The angle of the FPV camera is adjustable
7. 4mm thick arms, super strong and durable
8. High efficiency S2205 2300KV motor provides you better performance and longer working life
9. High quality 5042 3 blade propeller, 10% higher efficiency than normal propellers

Specifications:
Dimension:195mm x 230mm x 42mm (Propellers not included)
Diagonal Wheelbase: 250mm
Flight Controller: F4 flight Controller
Frame Material: Pure Carbon fiber
BNF weight:350g
Camera: Foxeer ARROW V3 FPV Camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: 10min hovering

ARRIS C250 V2 is made of pure carbon fiber material. With water transfer painting technology,it look so charming. The upper plate and side plate adopts 1.5mm pure carbon fiber material, decrease the weight of the whole frame. Meanwhile, the motor arm adopts 4mm carbon fiber material, ensure the strength of the frame. The total weight of the frame is about 137g.With the simplify one-piece design and lower gravity center design, all kinds of flight actions can be done with facility.The layout design of the C250 V2 is reasonable, the standard flight controller and PDB board can install there.On the frame, there is reserved space for the XT60 female battery connector.The motor arm has holes for 220x series motors, and both 5 inches and 6 inches propellers can install on the C250 V2 frame.

Omnibus F4 flight controller has the STM32F405 F4 processor,built-in Betaflight OSD, current sensor, VBatt, 5v 1.5-3A BEC output, MicroSD Black Box, video output filter, and the ability to tune PIDs over video or transmitter and etc. The MPU6000 inertial motion sensor was chosen for it's high reliability, accuracy and update speed in this flight controller. Such reliable, speed and featured packed controller board is one of the best choice for your fpv racing quads.

ARRIS S2205 2300KV brushless motor is the upgrade version of ARRIS 2205 2300KV motor.ARRIS S2205 is smooth and strong, it has high effiency and long working life. It adopts knurl design, cooling systems, hollowed steel prop shaft and lowe center design, plus the high quality magnets and NSK bearing, the ARRIS S2205 will bring you amazing flying experience.


The ARRIS C250 V2 adopts with the latest 5042 propeller, it has bigger windward area, well balance and strengthen root, and the efficiency is 10% higher than normal propeller. This propeller is the first choice of FPV racing drones.

The Foxeer Arrow V3 comes with excellent WDR, which works well in the fast change of the dark and bright environment, support 5-35V super wide voltage, and built-in microphone and FPV OSD.The angle of the camera is adjustable on the ARRIS C250 V2.

ARRIS 5.8g 200mW 40-CH video TX and antenna pre-assembled.TThe ARRIS TS5823S transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter! A must for those looking save size and weight while still getting good performance. The ARRIS TS5823S is transmitting a full range of 40 channels and only weighs 10g. It's perfect for a wide range of aircraft!

Package Include:
1 x ARRIS C250 V2 Racing Quad Frame
2 x ARRIS S2205 2300KV Brushless Motors CW
2 x ARRIS S2205 2300KV Brushless Motors CW
1 x Flycolor 30A ESC
1 x Betaflight OMNIBUS F4 Pro V2 Flight Controller
4 x ARRIS 5042 3-blade Propeller
1 x FOXEER ARROW V3 FPV Mini Camera
1 x 5.8G 200mw 40CH FPV TX
1 x FPV Transmitter Antenna
1 x ARRIS Buzzer

Radio, receiver, battery and charger need to buy separately.