The KDS Flymentor 3D Gyro Stabilization unit features in the following aspects:
1. Balancing all horizontal movements thru stabilizing the flying pose, controlling the speed of movements and locking the position.
2. The unique CCD sensor can capture the ground images and compare the location differences so as to prevent the helicopter from drifting.
3. The Flymentor offers two working modes, positioning mode and balancing mode. You can switch the modes thru the AUX channel.
4. Built-in Tail-lock Gyro and swashplate mixing controller.
5. The sensibility and working mode of the Gyro are controlled thru Gear channel.
6. Helicopters with 3S 120° 3S 140° 4S 90° or 4S 90°45°washplates are all compatible.
7. Horizontal balancing during inverted flights.
8. Set up thru a computer (USB plug)
9. If you are using FM/PPM radio system, when the helicopter is out of control, Flymentor will immediately center the aileron, elevator and rudder. The blade pitch will remain at the level in the last signal, and the Flymentor will switch to positioning mode automatically with sensitivity at 70%.
