My status
Email:
service@hobby-wing.com
RC Aircraft
Expert Multicopters(RTF/ARF)
Multicopters Frame
Mini Multicopters
FPV Aircraft RTF
For Beginner Helis
Mini 3D RC Helicopters
3D Advanced Helicopters
RC Helicopter Frame
Hobby-Wing Assembled
Aerial Photography/FPV
Brushless Gimbal
Brushless Gimbal Motors
Gimbal Related Parts
Monitor/Ground Station
OSD/GPS/Tracker
FPV Antennas
Video TX/RX System
FPV Cable/Connectors
FPV Accessories
Camera
Gopro & Accessories
FPV Equipment
Multi Rotor Aircraft Parts
Landing Skid & Parts
Arris Spare Parts
Tarot Multicopter Parts
DJI Spare Parts
DJI Phantom Parts
XAircraft Spare Parts
Lotus Spare Parts
Ideafly Ifly-4s Spare Parts
Flight Controller/GPS
ESC for Multicopter
Motors for Multicopter
Propellers for Multicopter
Multicopter Related Parts
Carbon Fiber materials
RC Aircraft Spare Parts
Walkera Helicopter Parts
Align T-rex Helicopter Parts
Hubsan Aircraft Spare Parts
Tarot Helicopter Parts
Nineeagles Helicopter Parts
Aeolus Spare Parts
WLtoys Spare Parts
MCPX Parts (Tarot)
Esky Helicopter Parts
GSUN Spare Parts
Other Aircraft Parts
R/C Accessories
Tarot 3 Axis FBL System
Skookum Flybarless System
Align Flybarless System
Blades
Li-Po Battery
Battery Charger& Adapter
CNC Metal Upgrades
Engines
Brushless Motor
Brushless Speed Controls
Gyro
Servos
Radio Set
Flight Simulator
Training Kit
Tools and Others
Connectors&Wires
Screwdrivers
Measuring Tools
Soldering Tools
Swashplate Leveler
Blade Balancer
Gear Puller
Ball Link Plier
Battery Fixed Straps
Carry Bags
GPS Antenna Base
Transmitter Related
Screws
Bearing
Others
FPV Related
Carbon Fiber materials
Carbon fiber Pultruded tube
Carbon Fiber Rod
Carbon fiber sheets
Roll wrapped carbon fiber tube
ARRIS Multicopter
Walkera RC Helicopter
T-rex RC Helicopters
Tarot Multicopters
Tarot RC Helicopters
Nineeagles RC Helis
XAircraft Multi Rotor
DJI Multi Rotor
HobbyWing RC
Solution Graphics
Home > RC Aircraft > 3D Advanced Helicopters > T-REX 800E DFC Super Combo RH80E01XW

T-REX 800E DFC Super Combo RH80E01XW

T-REX 800E DFC Super Combo RH80E01XW
Item# RH80E01XW
USD$1,780.00 
1780

Product Description



Focus Shot1(Newly designed aerodynamically efficient metal main blade control system) Focus Shot2(Dual section battery mount)
Focus Shot3(Top mounted motor base, allowing blade drafts to cool the motor effectively. New style linkage rod design, complete assembly increases linkage rod rigidity) Focus Shot4(Utilizes high spec M1 112T CNC helical main gear and M1 tail drive helical gear. Designed for 800 class helicopter, utilize 110T main gear and 13T pinion for optimal ratio)
Focus Shot5(Innovative sliding battery tray rails imbedded into 3K side frame) Focus Shot6(Add APS mount for easy ESC and APS GYRO installations)
Focus Shot7(A7075-T6 Aluminum alloy material and CNC processed Metal Anti Rotation Bracket ) Focus Shot8(High quality pre-painted vertical carbon tail fin & new 115mm 3K carbon fiber tail blades with thickened ŽÁ24mm tail boom)
Focus Shot9(Utilizes dual point attachment design for zero play and higher precision control feel) Focus Shot10(750MX(450KV) high efficiency, high torque brushless motor)
Focus Shot11(800 Carbon main blades) Focus Shot12(BL700H High Voltage Brushless Servo with CNC aluminum servo horns)
Focus Shot13(BL750H High Voltage Brushless Servo ) Focus Shot14(3GX Programmable Flybarless System)
Focus Shot15(Castle ICE2 HV 120 Brushless ESC)  
 
Instruction(3GX Programmable Flybarless System)
  • Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
  • 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
  • Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
  • Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
  • Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
  • With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
  • Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
  • 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
  • Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
  • 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
  • With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
  • 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
  • Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.
  • Specification(T-REX 800E DFC) :
    Features:
  • Designed specifically for aerial photography and cinematography. The long 800mm main blades provides superior flight stability and high payload capacity.
  • Equipped with DFC flybarless main rotor system, the extreme low CG design effectively lowers aerodynamic resistance and improves flight stability characteristics.
  • Carbon material integration technology is used in frame plate structure, resulting in simple maintenance and operation convenience. Poses both carbon and plastic material advantages, which supplements carbon material to achieve rigid and hard characteristics, not the traditional rigid but brittle characteristics.
  • Frame has mounting location for the optional Align aerial gimbal system upgrade, which can be mounted without any modifications.
  • Dedicated APS control unit and sensor unit mounting platform to simplify installation.
  • Innovative sliding battery tray rails imbedded into 3K side frame, providing easy battery access and protection.
  • Top mounted motor base, allowing blade drafts to cool the motor effectively.
  • Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
  • Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight.
  • Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
  • New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation.
  • Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve overall power output.
  • Brand new gear box with more streamlined design also allows for simpler disassembly.
  • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
  • High torque rated one way bearing base.
  • High precision bearing supported dual push point rudder control design.
  • High speed rated thrust bearings incorporated into tail blade grips.
  • Utilizes third bearing block on main shaft to improve frame's anti-torque rigidity.
  • High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to simplify installation.
  • New CNC aluminum alloy mounting plate.


    Users must have a certain concept of security to operate the R/C helicopters. 
    Be sure to read and comply with related safety notes of instruction manual before flying.
  • Specification(3GX Programmable Flybarless System)
  • Operating Temperature:-10~60 degree
  • X and Y axis Operating Angle Range:-300~+300 degree
  • Z axis Operating Angle Range:-600~+600 degree
  • Size:36.5x25.2x15.6 mm Size 
  • Weight11g Weight
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers 
  • Supports 90/120/135/140 CCPM swashplates
  • Field setup without the use of a PC
  • Compatible with 2 to 5 blades rotor heads
  • Support up to 6 servos
  • Automatic servo type recognization
  • Specification(T-REX 800E DFC)
  • Length: 1490mm
  • Height: 400mm
  • Main Blade Length: 800mm
  • Main Rotor Diameter: 1780mm
  • Tail Rotor Diameter: 301mm
  • Motor Drive Gear:13T
  • Main Drive Gear:110T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 1:8.46:4.73
  • Weight(With Motor): 3516g
  • Flying Weight: 5400g
  • Accessories:
  • T-REX 800E DFC Kits Set x 1set
  • 3K Carbon Fiber Tail Boom x 1
  • 800 Carbon Fiber Blades x 1set
  • 750MX Brushless Motor(450KV) x 1
  • 3GX Flybarless system x 1
  • BL700H High Voltage Brushless Servo x 3
  • BL750H High Voltage Brushless Servo x 1
  • Castle ICE2 HV 120 Brushless ESC x 1
  • 115mm 3K Carbon Fiber Tail Blades x 1set


    Radio transmitter and electronic equipment required for assembly:
  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 4500 ~ 5200mAh x 2 
  • 2S Li-Po 1900 ~ 2300mAh x 1 
  • Dial Pitch Gauge
  •  



    Why buy from us?
    What makes Hobby-wing different from other online sellers? We put the customer first! A customer-centered shopping experience has always been our goal and we pride ourselves in our comprehensive policies that have put us in a realm above and beyond others. Having processed over 60,000 orders in 6 years, Hobby-wing knows how to satisfy you!
    Paypal recommended seller. Based on the excellent credit and outstanding sales in the past few years, we have become one of Paypal's strongly recommended sellers.
    Professional and fast order processing. We arrange shipment in 24 hours after we receive your order. All merchandises and shipping address are double checked to guarantee that your order will arrive with correct contents in a timely fashion. We will inform you in 48 hours after you place the order if there is unexpected delay in shipment.
    Secured Packing. There are various packing materials available here. For different products, we work out the best and most scientific packing methods to protect parcels from any damages.
    Direct cooperation with professional logistics. Unlike other online sellers who use agents, we directly cooperate with UPS and China Post. Such direct cooperation minimizes shipment processing procedures and you can receive your parcels earlier. Besides, when something wrong happens, we can handle it at the earliest time in the most effective way.
    Guaranteed products pre-test. All radio controlled products are thoroughly pre-tested by technicians before shipment to make sure they are all in excellent working condition.
    Exceptional Customer Service
    Our knowledgeable Product Experts and Customer Service Specialists are available via e-mail, online chat, and telephone to ensure the ultimate quality in customer relations based on unparalleled professionalism.
    All ready accessories and parts support.
    Copyright© 2006-2012 www.hobby-wing.com here All Rights Reserved.