My status
Email:
service@hobby-wing.com
RC Aircraft
Expert Multicopters(RTF/ARF)
Multicopters Frame
Mini Multicopters
FPV Aircraft RTF
For Beginner Helis
Mini 3D RC Helicopters
3D Advanced Helicopters
RC Helicopter Frame
Hobby-Wing Assembled
Aerial Photography/FPV
Brushless Gimbal
Brushless Gimbal Motors
Gimbal Related Parts
Monitor/Ground Station
OSD/GPS/Tracker
FPV Antennas
Video TX/RX System
FPV Cable/Connectors
FPV Accessories
Camera
Gopro & Accessories
FPV Equipment
Multi Rotor Aircraft Parts
Landing Skid & Parts
Arris Spare Parts
Tarot Multicopter Parts
DJI Spare Parts
DJI Phantom Parts
XAircraft Spare Parts
Lotus Spare Parts
Ideafly Ifly-4s Spare Parts
Flight Controller/GPS
ESC for Multicopter
Motors for Multicopter
Propellers for Multicopter
Multicopter Related Parts
Carbon Fiber materials
RC Aircraft Spare Parts
Walkera Helicopter Parts
Hubsan Aircraft Spare Parts
Tarot Helicopter Parts
RJX Helicopter Parts
Align T-rex Helicopter Parts
Nineeagles Helicopter Parts
Aeolus Spare Parts
WLtoys Spare Parts
MCPX Parts (Tarot)
Esky Helicopter Parts
GSUN Spare Parts
Other Aircraft Parts
R/C Accessories
Tarot 3 Axis FBL System
Skookum Flybarless System
Align Flybarless System
Blades
Li-Po Battery
Battery Charger& Adapter
CNC Metal Upgrades
Engines
Brushless Motor
Brushless Speed Controls
Gyro
Servos
Radio Set
Flight Simulator
Training Kit
Tools and Others
Connectors&Wires
Screwdrivers
Measuring Tools
Soldering Tools
Swashplate Leveler
Blade Balancer
Gear Puller
Ball Link Plier
Battery Fixed Straps
Carry Bags
GPS Antenna Base
Transmitter Related
Screws
Bearing
Others
FPV Related
Carbon Fiber materials
Carbon fiber sheets
Roll wrapped carbon fiber tube
Carbon fiber Pultruded tube
Carbon Fiber Rod
ARRIS Multicopter
Walkera RC Helicopter
T-rex RC Helicopters
Tarot Multicopters
Tarot RC Helicopters
Nineeagles RC Helis
XAircraft Multi Rotor
DJI Multi Rotor
HobbyWing RC
Solution Graphics
Home > RC Aircraft > 3D Advanced Helicopters > T-REX 450 PRO DFC RC Helicopter RTF W/DEVO8S (100% Assembled)

T-REX 450 PRO DFC RC Helicopter RTF W/DEVO8S (100% Assembled)

T-REX 450 PRO DFC RC Helicopter RTF W/DEVO8S (100% Assembled)
Item# HC-AL-KX015087-D8S
USD$729.00 
729
Mode: 
[out of stock]
T-REX 450PRO DFC Super Combo KX015087
T-REX 450PRO DFC Super Combo KX015087
USD$(485)
T-REX 450 PRO DFC RC Helicopter RTF W/DEVO7 (100% Assembled)
T-REX 450 PRO DFC RC Helicopter RTF W/DEVO7 (100% Assembled)
USD$(619)
T-REX 450 PRO DFC RC Helicopter RX-Ready (100% Assembled)
T-REX 450 PRO DFC RC Helicopter RX-Ready (100% Assembled)
USD$(529)

Product Description







Product:
Focus Shot1(Equipped with the DFC flybarless head head assembly, with extremely low CG design to minimize wid resistanec) Focus Shot2(New 450DFC CCPM Metal Swashplate) Focus Shot3(Integrated battery / ESC mount, allowing adjustment based on battery dimension for optimal CG of the helicopter)
Focus Shot4(New removable main shaft block and servo mounting block) Focus Shot5(Removable structure for easy servos assembly) Focus Shot6(Highly efficient helical main gear)
Focus Shot7(New style gyro mounting platform with added length) Focus Shot8(Vertical rudder servo mount design moving the CG closer to center) Focus Shot9(High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly)
Focus Shot10(450MX Brushless motor 3400KV) Focus Shot11(325D 3G Carbon blades) Focus Shot12(DS415M (Metal Gear)Digital servo)
Focus Shot13(DS520 Digital servo) Focus Shot14(3GX Flybarless System) Focus Shot15(RCE-BL35P 35A Brushless ESC)
Walkera Devention DEVO8S 7CH Radio Set(LCD Series)
The Built-in Telemetry helps to inspect fast Model data.
You can enjoy your flight without any doubt about the safty problem as the built-in telemetry feature gives you swift and real-time feadback of the model data. The data fast help you learn the Battery Voltage. Temperature, RPM and GPS information that can prevent crashes and monitor the model flying status. You just need to slightly touch the screen, the telemetry data would be easily found. You can also have the DEVO 8S alert with a beep audio whenever any telemetry values exceed the fefined limits.
Instruction(3GX Programmable Flybarless System):
Specification(3GX Programmable Flybarless System):
  • Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
  • 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
  • Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
  • Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
  • Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
  • With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
  • Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
  • 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
  • Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
  • 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
  • With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
  • 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
  • Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.
  • Operating Temperature:-10~60 degree
  • X and Y axis Operating Angle Range:-300~+300 degree
  • Z axis Operating Angle Range:-600~+600 degree
  • Size:36.5x25.2x15.6 mm Size
  • Weight11g Weight
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Supports 90/120/135/140 CCPM swashplates
  • Field setup without the use of a PC
  • Compatible with 2 to 5 blades rotor heads
  • Support up to 6 servos
  • Automatic servo type recognization
  • Instructions:(T-REX 450PRO DFC) Specification:(T-REX 450PRO DFC)

    Features:

  • Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
  • New removable main shaft block and servo mounting block to simplify main shaft and servo maintenance.
  • Integrated battery and ESC mounting platform, with adjusted battery position to achieve the most optimal CG position of the helicopter.
  • Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
  • New improved frame side plates with dedicated 3GX mounting location, to simplify wire management and overall aesthetics.
  • New style gyro mounting platform with added length.
  • Highly rigid and lightweight carbon side plates.
  • New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.
  • Unique anti-centripetal force weight tail blade grips to improve rudder locking effect.
  • Equipped with Align's brand new MX series high efficiency brushless motor.
  • Highly efficient torque tube tail drive design, dramatically reduce power loss found on belt driven system.
  • Streamlined design canopy.

    Users must have a certain concept of security to operate the R/C helicopters.
    Be sure to read and comply with related safety notes of instruction manual before flying.

  • Length: 640mm
  • Height: 204mm
  • Main Rotor Diameter: 710mm
  • Tail Rotor Diameter: 158mm
  • Motor Drive Gear: 12T
  • Main Drive Gear: 121T
  • Autorotation Tail Drive Gear: 106T
  • Tail Drive Gear: 25T
  • Drive Gear Ratio: 1:10.08:4.24
  • Weight(w/o power system): 513g
  • Flying Weight: Approx. 638g
  • Accessories:
  • T-REX 450 PRO DFC Kit x 1 set
  • 3GX Flybarless System x 1 set
  • 325D 3G Carbon blades x 1 set
  • RCE-BL35P 35A Brushless ESC x 1
  • 450MX Brushless motor(3400KV) x 1
  • DS415M (Metal Gear)Digital servo x 3
  • DS520 Digital servo x 1
  • DEVO8S 8-CH Transmitter X1
  • RX801 8-CH Receiver X1

    Battery is not included, you need have one 11.1V 3S Li-Po 2000~2300mAh battery and a Charger

  • Related Items



    Why buy from us?
    What makes Hobby-wing different from other online sellers? We put the customer first! A customer-centered shopping experience has always been our goal and we pride ourselves in our comprehensive policies that have put us in a realm above and beyond others. Having processed over 60,000 orders in 6 years, Hobby-wing knows how to satisfy you!
    Paypal recommended seller. Based on the excellent credit and outstanding sales in the past few years, we have become one of Paypal's strongly recommended sellers.
    Professional and fast order processing. We arrange shipment in 24 hours after we receive your order. All merchandises and shipping address are double checked to guarantee that your order will arrive with correct contents in a timely fashion. We will inform you in 48 hours after you place the order if there is unexpected delay in shipment.
    Secured Packing. There are various packing materials available here. For different products, we work out the best and most scientific packing methods to protect parcels from any damages.
    Direct cooperation with professional logistics. Unlike other online sellers who use agents, we directly cooperate with UPS and China Post. Such direct cooperation minimizes shipment processing procedures and you can receive your parcels earlier. Besides, when something wrong happens, we can handle it at the earliest time in the most effective way.
    Guaranteed products pre-test. All radio controlled products are thoroughly pre-tested by technicians before shipment to make sure they are all in excellent working condition.
    Exceptional Customer Service
    Our knowledgeable Product Experts and Customer Service Specialists are available via e-mail, online chat, and telephone to ensure the ultimate quality in customer relations based on unparalleled professionalism.
    All ready accessories and parts support.
    Copyright© 2006-2012 www.hobby-wing.com here All Rights Reserved.